Hi there.
Finally received my Dolphin Plus(Brazilian name for Dolphin 60.5kw) and it is working fine as replacement for my diesel generator!!!
Some comments that i believe that is interesting.
My car came with v2l set to output about 90v 50hz.
I need to contact BYD to explain my local dealer how to change it to 220v 60hz.
After some frustration coming and going between BYD & Dealer they managed how to set it.
When i saw that have several options between 90 and 240v i asked technician to set it to 230v 60hz to compensate any loss when demanding hi power from it.
Testing using aliexpress cheap un fused adapter i was able to drain about 3000w when conected it to generator input of deye inverter, but this almost melted adapter contacts on plug side. So i decided to make my own v2l adapter.
Bought from aliexpress a 32A type 2 connector and used adequate wiring to connect it to gen input.(6mm cable)
Bonus on this!!!
Deye have a dry contact relay to remote control generator. So i added to my cable 2 extra wires to inverter control remotely v2l output putting relay contacts in series with resistor(2 way 1.5mm cable).
Tested this setup for 12 hours and everything work fine.
During testing i used about 15kw from car.
Limited gen input to 3000W.
Battery that started test on 100% about 19:00 ended about 75% when sun rised about 8:00.
No more connector overheat once type 2 adapter that i bough is 32a.
Only issue that i faced is that’s not possible to connect car’s PE to Home Earth because connection between neutral and Earth. So i installed a separate Earth bar for this circuit.
3 Likes