# Solar quote \*Sydney Sutherland Shire\*
**URL:** https://forum.cleanenergyreviews.info/t/solar-quote-sydney-sutherland-shire/2368
**Category:** Solar Quote Reviews
**Created:** [December 12, 2022, 3:29am UTC](https://forum.cleanenergyreviews.info/t/solar-quote-sydney-sutherland-shire/2368 "2022-12-12T03:29:40Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@Robert\_Ye](https://forum.cleanenergyreviews.info/u/Robert_Ye)
#### Post date: [December 12, 2022, 3:29am UTC](https://forum.cleanenergyreviews.info/t/solar-quote-sydney-sutherland-shire/2368/1 "2022-12-12T03:29:40Z")
Hi There,
I’m getting some quotes for a 38-40 panel system enphase micro iQ7A’s
Out of these 3 quotes, I’d like to know which panels to consider please:
1. Jinko tiger 415w (arise solar $17500 x40 panels)
2. Jinko tiger 440 (arise solar $17500 x40 panels)
3. Sunpower performance 3 AC (ag solar $18800 x 38 panels)
one installer recommends the 415 over 440 at the same price.
one installer recommends the sunpowers but I fear they are not oversized enough for the inverter.
bonus points if you’re considering 144 cell panels for higher voltage to get around the 10amp limit.
thanks in advance
---
### Author:  [@Svarky](https://forum.cleanenergyreviews.info/u/Svarky)
#### Post date: [December 15, 2022, 12:13am UTC](https://forum.cleanenergyreviews.info/t/solar-quote-sydney-sutherland-shire/2368/2 "2022-12-15T00:13:46Z")
Are the Jinko Tiger 415W the N-type panels? (415w tiger n-type 66tr). If so, then I would probably go with the 415W as N-type is superior to P-type. What specific model Jinko panels are they?
Also, the Sunpower performance 3 are a great panel. The actual oversizing (real-world performance) depends on several factors, including the orientation and tilt of the array.
---
### Author:  [@Robert\_Ye](https://forum.cleanenergyreviews.info/u/Robert_Ye)
#### Post date: [February 23, 2023, 3:07am UTC](https://forum.cleanenergyreviews.info/t/solar-quote-sydney-sutherland-shire/2368/3 "2023-02-23T03:07:45Z")
thanks @Svarky
I ended up committing to a 24.07kw system and paid my deposit with a company called myenergy group
I can’t see 415 w tiger n type 66tr’s on the jinko website. Are they not sold anymore perhapse?
It may not be too late to change panels if you think it’s worth it, but I got Jinko 58 panels of Jinko JKM415N-54HL4-V
I got 2 solar edge inverters:
10kw genesis SE10000H-AUL00BNU4
and
8.25kw Energy Hub SE8250H-AUS3MBX14
every panel has s440 power optimisers on it and i’m paying $24 000
roof design is on the complex side (4 x extra split aray, 3x roofs with only 2-4 panels on them) and is double story on tile roof.
your thoughts / comments about the price and panels would be appreciated.
---
### Author:  [@Svarky](https://forum.cleanenergyreviews.info/u/Svarky)
#### Post date: [February 23, 2023, 6:29am UTC](https://forum.cleanenergyreviews.info/t/solar-quote-sydney-sutherland-shire/2368/4 "2023-02-23T06:29:02Z")
Hi @Robert_Ye, that sounds like a good system at a very good price considering the components, roof complexity and height.
You are correct that the 66TR’s are no longer available. The JKM415N-54HL4-V are the better N-type panels. In fact, I just installed a string of these exact panels last week in a small upgrade to my own off-grid system. Very nice, I like the design with 16 micro busbars, performance is great.